page 1 of 3 models ? ultra compact dip package 0.52 x 0.36 x 0.40 inch ? i/o-isolation 1500 vdc ? fully regulated outputs ? operating temperature range C40c to +75c ? short circuit protection ? remote on/off ? 3-year product warranty the tdn 5wi series redefnes the power density of high performance dc/dc converters. the cubical package of only 1.23 cm3 encloses a sophisticated circuit which provides 5 watt output power. they operate up to 50c environment tem - perature at full load or up to 75c with a 50% load de-rating. with 1500 vdc i/o- isolation voltage, external on/off, and short current protection they cover a wide range of application when space is limited. the input of the converters is designed for a wide voltage range (4:1) and minimum load is not required. order code input voltage output voltage output current max. effciency typ. tdn 5-0910wi 3.3 vdc 1000 ma 76 % tdn 5-0911wi 5.0 vdc 1000 ma 80 % tdn 5-0912wi 12 vdc 420 ma 83 % tdn 5-0913wi 4.5 C 12 vdc 15 vdc 333 ma 83 % tdn 5-0915wi (5 vdc nominal) 24 vdc 210 ma 83 % tdn 5-0921wi 5.0 vdc 500 ma 80 % tdn 5-0922wi 12 vdc 210 ma 83 % tdn 5-0923wi 15 vdc 168 ma 83 % tdn 5-2410wi 3.3 vdc 1000 ma 76 % tdn 5-2411wi 5.0 vdc 1000 ma 80 % tdn 5-2412wi 12 vdc 420 ma 83 % tdn 5-2413wi 9 C 36 vdc 15 vdc 333 ma 83 % tdn 5-2415wi (24 vdc nominal) 24 vdc 210 ma 83 % tdn 5-2421wi 5.0 vdc 500 ma 80 % tdn 5-2422wi 12 vdc 210 ma 83 % tdn 5-2423wi 15 vdc 168 ma 84 % tdn 5-4810wi 3.3 vdc 1000 ma 76 % tdn 5-4811wi 5.0 vdc 1000 ma 81 % tdn 5-4812wi 12 vdc 420 ma 83 % tdn 5-4813wi 18 C 75 vdc 15 vdc 333 ma 83 % tdn 5-4815wi (48 vdc nominal) 24 vdc 210 ma 83 % tdn 5-4821wi 5.0 vdc 500 ma 80 % tdn 5-4822wi 12 vdc 210 ma 83 % tdn 5-4823wi 15 vdc 168 ma 84 % models http://www.tracopower.com dc/dc converter tdn 5wi series, 5 watt
page 2 of 3 input specifications input current no load 5 vin models: 80 ma typ 24 vin models: 30 ma typ. 48 vin models: 15 ma typ. surge voltage (1 sec. max.) 5 vin models: 15 v max. 24 vin models: 50 v max. 48 vin models: 100 v max. reflected ripple current 5 vin models: 40 map-p typ. 24 vin models: 20 map-p typ. 48 vin models: 15 map-p typ. conducted noise en 55022 class a or b with external components, see supporting documents esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 6 kv, perf. criteria a radiated immunity en 61000-4-3, 10 v/m, perf. criteria a fast transient / surge (with external input capacitor) en 61000-4-4, 2 kv, perf. criteria a en 61000-4-5, 1 kv perf. criteria a Cexternal input capacitor all models: nippon chemi-con ky 220f/100v conducted immunity en 61000-4-6, 10 vrms, perf. criteria a output specifications voltage set accuracy 1 % max. voltage balance (dual output models) 1 % max. regulation C input variation 0.2 % max. C load variation 0 C 100 % single output: 1 % max. dual output: 1 % max. (balanced load) cross regulation - dual output: 5 % max. (asymmetrical load 25 % / 100 %) temperature coefficient 0.02 %/k typ. ripple and noise (20 mhz bandwidth) 75 mvp-p typ. start up time C power on 10 ms max. (constant resistive load) C remote on 10 ms max. transient response (25% load step change) 500 s typ. short circuit protection continuous, automatic recovery capacitive load Csingle output 3.3 vdc models: 4400 f max. 5.0 vdc models: 2200 f max. 12 vdc models: 1220 f max. 15 vdc models: 1000 f max. 24 vdc models: 470 f max. Cdual output 5.0 vdc models: 1000 f max. (each output) 12 vdc models: 680 f max. (each output) +15 vdc models: 440 f max. (each output) general specifications temperature ranges C operating (convection cooling 20lfm, 0,1m/s) C40c to +75c C case temperature +95c max. C storage temperature C55c to +125c derating 1.8%/k above 50c humidity (non condensing) 95 % rel h max. isolation voltage C i/o isolation voltage (60 sec.) 1500 vdc isolation capacitance 50 pf max. isolation resistance (@ 500 vdc) >1 gohm reliability, calculated mtbf (mil-hdbk-217f at +25c, ground benign) 2280000 h tdn 5wi series, 5 watt http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower. com page 3 of 3 general specifications switching frequency 100 khz min. pulse frequency modulation. thermal shock & vibration mil-std-810f remote on/off Con: open circuit or high impedance Coff: 2 C 4 ma current applied via 1kohm resistor Coff idle current: 2.5 ma max. safety standards ul 60950-1 iec/en 60950-1 C certification documents see supporting documents environmental compliance C reach see supporting documents C rohs rohs directive 2011/65/eu physical specifications casing material non-conducting fr4 (ul 94v-0 rated) potting material silicone (ul 94v-0 rated) pin material tinned copper package weight 2.7g ( 0 .10 oz ) soldering temperature max. 260c / 6 sec outline dimensions pin single dual 1 +vin (vcc) +vin (vcc) 2 Cvin (gnd) Cvin (gnd) 4 on/off on/off 5 no con. Cvout 6 Cvout common 7 +vout +vout pin-out dimensions in [mm], () = inch tolerances: x.xx 0.5 (0.02) x.xxx 0.25(0.01) pin pitch tolerances 0.25 (0.01) pin dimension tolerance 0.1 (0.004) 4.5 (0.18) 9.9 (0.39) 10.2 (0.40) 0.6 (0.024) 13.2 (0.52) 5.07 (0.2) 9.1 (0.52) 3 x 2.0 (3 x 0.08) bottom viev 1 2 4 5 6 7 0.25 (0.01) 9.9 (0.39) 10.2 (0.40) 0.6 (0.024) 13.2 (0.52) 4.8 (0.19) 9.1 (0.52) 3 x 2.0 (3 x 0.08) bottom viev 14.2 (0.56) 1 2 4 5 6 7 smd package (on demand): dip package: supporting documents: www.tracopower.com/overview/tdn5wi tdn 5wi series, 5 watt rev. january 11. 2016
|
